🚧 Under Construction 🚧 Click here for Oz Tuning's current website.
1 8

JD Performance Solutions. Drop-in Returnless Dual-pump Fuel Module – 2018+ F150 5.0L with Forced Induction (Stage 2)

The new standard for forced induction!
Stage 2 - Up to 1000whp. Supports, Whipple, Roush, Edelbrock, ProCharger, Odin!

DESCRIPTION

DESCRIPTION:

  • Stage 2 System (Dual 18+ 5.0 Flex Fuel Pumps, 1000 WHP rated on E85)
  • Retains OEM Siphon system to ensure fuel starvation isn’t an issue at low fuel levels.
  • Every pump is built to order by VIN to ensure proper fitment.
  • 100% QA/QC. Pumps are tested, calibrated, verified and logged on a certified flow bench before shipping. Flow meter is accurate to within 0.5% with 0.03% repeatability. Flow data print-out is available upon request.
  • Retains OEM EVAP system.
  • Custom billet fuel pump holder and relief valve.
  • Includes a plug and play inline fuel filter kit that utilizes an OEM Motorcraft GT350/GT500 filter.
  • New dual fuel pump driver module harness eliminates the need for a Hobbs switch. This eliminates a potential point of failure and gives the tuner full PCM control over fuel pressure via the tune.
  • Every harness is bench tested and each leg is resistance checked.
  • Absolutely no irreversible modifications required to the vehicle to install this system.
NOTES & REQUIREMENTS

NOTES & REQUIREMENTS:

  • Fuel rails are needed for anything over 800 whp, and a good idea for anything over 700 whp. If your application does not already have included upgraded rails, follow this link. 2018-2020 Rail Kit.
  • TUNING IS REQUIRED.
  • ***Built to order. Please allow 4-6 weeks build time for your application.

Install video in media section.

Before you order, click the tabs and read the important, but maybe not so exciting stuff.

DESCRIPTION

DESCRIPTION:

  • Stage 2 System (Dual 18+ 5.0 Flex Fuel Pumps, 1000 WHP rated on E85)
  • Retains OEM Siphon system to ensure fuel starvation isn’t an issue at low fuel levels.
  • Every pump is built to order by VIN to ensure proper fitment.
  • 100% QA/QC. Pumps are tested, calibrated, verified and logged on a certified flow bench before shipping. Flow meter is accurate to within 0.5% with 0.03% repeatability. Flow data print-out is available upon request.
  • Retains OEM EVAP system.
  • Custom billet fuel pump holder and relief valve.
  • Includes a plug and play inline fuel filter kit that utilizes an OEM Motorcraft GT350/GT500 filter.
  • New dual fuel pump driver module harness eliminates the need for a Hobbs switch. This eliminates a potential point of failure and gives the tuner full PCM control over fuel pressure via the tune.
  • Every harness is bench tested and each leg is resistance checked.
  • Absolutely no irreversible modifications required to the vehicle to install this system.
NOTES & REQUIREMENTS

NOTES & REQUIREMENTS:

  • Fuel rails are needed for anything over 800 whp, and a good idea for anything over 700 whp. If your application does not already have included upgraded rails, follow this link. 2018-2020 Rail Kit.
  • TUNING IS REQUIRED.
  • ***Built to order. Please allow 4-6 weeks build time for your application.

Install video in media section.

No Sales to California

We are not selling any products to CA. Any orders with CA billing or shipping will be cancelled minus a 5% fee and refunded.


NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. THE SALE, USE, OR INSTALLATION OF THIS PRODUCT MAY ALSO BE ILLEGAL NATIONWIDE UNDER THE FEDERAL CLEAN AIR ACT (42 U.S.C. § 7522(A)(3)).

SKU: jd-dual-pump-15-stage -2
$1,850.00
Back to top
DESCRIPTION

DESCRIPTION:

  • Stage 2 System (Dual 18+ 5.0 Flex Fuel Pumps, 1000 WHP rated on E85)
  • Retains OEM Siphon system to ensure fuel starvation isn’t an issue at low fuel levels.
  • Every pump is built to order by VIN to ensure proper fitment.
  • 100% QA/QC. Pumps are tested, calibrated, verified and logged on a certified flow bench before shipping. Flow meter is accurate to within 0.5% with 0.03% repeatability. Flow data print-out is available upon request.
  • Retains OEM EVAP system.
  • Custom billet fuel pump holder and relief valve.
  • Includes a plug and play inline fuel filter kit that utilizes an OEM Motorcraft GT350/GT500 filter.
  • New dual fuel pump driver module harness eliminates the need for a Hobbs switch. This eliminates a potential point of failure and gives the tuner full PCM control over fuel pressure via the tune.
  • Every harness is bench tested and each leg is resistance checked.
  • Absolutely no irreversible modifications required to the vehicle to install this system.
NOTES & REQUIREMENTS

NOTES & REQUIREMENTS:

  • Fuel rails are needed for anything over 800 whp, and a good idea for anything over 700 whp. If your application does not already have included upgraded rails, follow this link. 2018-2020 Rail Kit.
  • TUNING IS REQUIRED.
  • ***Built to order. Please allow 4-6 weeks build time for your application.

Install video in media section.